About us
Services
Experiences
Brands
Shop
Home
>
>
Veldt X-ACT BORE PASTE (10ml)
BACK
Zoom

Veldt X-ACT BORE PASTE (10ml)

R165.00

Processing time 1 to 2 days

X-ACT BORE PASTE is a concentrated bore paste that is designed for extreme cleaning and the removal of stubborn fouling that cannot be removed with traditional cleaners.

Processing time 1 to 2 days

Add to wishlistAdd to compare
Add to Wishlist
Store availability
SKU: BPT10 Category: Brand:
Share:

X-ACT BORE PASTE is a concentrated bore paste that is designed for extreme cleaning and the removal of stubborn fouling that cannot be removed with traditional cleaners. Anything from burned-on and glazed carbon, caked-in residues, stubborn copper jacket fouling, plastic wads, moly, and lead traces will be removed from the barrel.

The paste is designed to move to its liquid phase during use and will ensure that the cleaning medium is moved inside the bore for the ultimate cleaning coverage.

This product is non-flammable, non-corrosive, and non-abrasive, and no vapor or foul odor forms on use. This is a paste and will not run into tight spaces and dmage wood stocks or grips. It will not react with the bluing on barrels.

This remains a chemical, so think & test before you apply.

Click the Veldt logo below to download the X-ACT BORE PASTE product sheet:

 

 

 

RECOMMENDED FOR TREATMENT AND REMOVAL OF:

  • STUBBORN FOULING
  • BURNED-ON AND GLAZED CARBON
  • CAKED-IN RESIDUES
  • EXTREME COPPER JACKET FOULING
  • PLASTIC WADS, MOLY, AND LEAD

 

COMPATIBILITY:

  • ALL BARRELS

SECURE AND UNLOAD THE FIREARM

  • Marksmen can make use of X-ACT bore paste in conjunction with patches, mops, pellets, or nylon/brass brushes.
  • Always start the cleaning regime with a VELDT BORE CLEANER before using X-ACT.
  • Ensure that a clean patch is used before shifting over to the X-ACT.
  • X-ACT is compatible with VELDT CO-G Oil. CO-G OIL/any of the VELDT bore cleaners can be added to the patch, mop, pellet, or brush for extreme cleaning.
  • Add a pea-size of X-ACT paste to the patch/brush.
  • Run each patch, mop, pellet, or brush 8-10 times through the bore.
  • Continuously run dry, clean patches through until the patches gather no residue at the barrel tip.
  • Repeat the X-ACT treatment if needed for extreme fouling.
  • Always end with running a patch or nylon/brass brush through the barrel with a VELDT BORE CLEANER RANGE suitable for your firearm type to remove any possible X-ACT Bore paste residue from the barrel.
  • Remember to oil the barrel before storage.
  • Always run a clean, dry patch through the firearm before use to prevent any obstructions.

Q: When is it necessary to use X-ACT Bore Paste?

A: X-ACT Bore Paste is designed for extreme cleaning and the removal of stubborn fouling that cannot be removed with traditional bore cleaners. Anything from burned-on and glazed carbon, caked-in residues, stubborn copper jacket fouling, plastic wads, moly, and lead traces will be removed from the barrel.

Q: Can I use X-ACT Bore Paste with a solvent and or a lubricant?

A: Yes, you can use X-ACT Bore paste in conjunction with any of the Veldt Marksman Bore Cleaner ranges- it all depends on the type of fouling you would like to address inside your barrel. 

X-ACT Bore Paste works extremely well in conjunction with P51 Penetrating Oil as well as Veldt Marksman Co-G Multi-purpose Oil.

For example:

Extreme Carbon Fouling= CarbonAttack + Bore Paste (used together on a patch) + after clean use a final patch with Co-G Oil

Q: Will X-ACT Bore Paste scratch the inside my barrel?

A: No, X-ACT Bore Paste, on the Mohs scale, is much lower than steel, therefore X-ACT Bore Paste will only remove the fouling present on top of the steel, for example, heavy baked on copper and or carbon, and X-ACT will not damage the grooves or landings or coatings present in your barrel.

Q: Is X-ACT Bore Paste compatible will all barrels for example Stainless Steel and or Mild Steel Barrels?

A: Yes, X-ACT Bore Paste can be used on all barrel types and will not damage the inside of the barrel. X-ACT Bore Paste is a non-corrosive, non-embedding cleaner.

Weight 0.45 kg
Dimensions 8.5 × 5.2 × 5.2 cm
Brand

Veldt
Size (ml)

10ml
Treats

Burned on and glazed carbon, Caked-in residues, Extreme Copper Fouling, Plastic wads, moly & lead, Stubborn Fouling

Related Products